Calculators

Coffee Extraction Yield Calculator

Estimate coffee extraction yield as the percentage of dry coffee grounds dissolved into the brewed beverage, using brewed coffee mass and dry coffee dose.

Loading calculator...

What this Coffee Extraction Yield Calculator does

The Coffee Extraction Yield Calculator estimates how much of the dry coffee dose dissolved into the brewed beverage, expressed as a percentage. It uses three measurements: brewed coffee mass in grams, dry coffee dose in grams, and the beverage’s total dissolved solids, or TDS, as a percentage. The result is an estimate of extraction yield, not a direct measure of flavor or quality.

The calculation first estimates the mass of dissolved coffee material in the beverage. It multiplies brewed beverage mass by the TDS fraction. It then divides that dissolved mass by the dry grounds dose and converts the ratio to a percentage. For example, a beverage mass of 300 g at 1.35% TDS contains an estimated 4.05 g of dissolved material. From an 18 g dose, that gives a yield of 22.5%.

This measurement can help describe a brew in a repeatable way. It does not say whether a cup tastes balanced, sweet, sharp, bitter, or satisfying. Beans, roast, water, grind, temperature, filter, and brewing method all shape the cup. Use the number as one piece of brew information alongside tasting notes and the recipe.

How to use the Coffee Extraction Yield Calculator

Weigh the finished coffee beverage, measure its TDS with a suitable coffee refractometer, and enter the dry coffee dose. Use grams for both mass fields. Enter TDS as a percentage, such as 1.35 for a reading of 1.35%, rather than as a decimal such as 0.0135. The calculator applies the percent conversion in its formula.

  • Brewed coffee mass is the mass of the liquid coffee you are evaluating. If you measure the beverage in a cup, tare the scale with the empty cup first.
  • Dry coffee dose is the mass of the ground coffee used for that brew, before water is added.
  • Brewed coffee TDS is the percentage of dissolved solids reported for a representative beverage sample. Follow your instrument’s instructions for preparing and reading a sample.

Suppose a pour-over produces 300 g of beverage from an 18 g dose, and the measured TDS is 1.35%. Enter 300, 18, and 1.35. The calculator estimates dissolved material as 300 × 1.35 ÷ 100 = 4.05 g. It then divides 4.05 by 18 and multiplies by 100, giving an estimated extraction yield of 22.50%.

For a useful comparison, keep your measurement routine consistent. A sample with grounds or uneven concentration can distort a reading. If you compare recipes, record the bean, grind setting, water, brew method, dose, beverage mass, TDS, and tasting impression for each cup.

How the Coffee Extraction Yield Calculator formula works

The formula is (brewed coffee mass × TDS ÷ 100) ÷ dry coffee dose × 100. The first division by 100 changes TDS from a percent into a fraction. Multiplying that fraction by beverage mass estimates the mass of dissolved solids in the cup. Dividing by the dry dose gives the fraction of the grounds’ starting mass represented by those dissolved solids. The final multiplication by 100 expresses that fraction as a percentage.

The calculation assumes that the entered beverage mass and TDS describe the same finished brew, and that the dry dose is the coffee used to make it. It does not model retained water, grounds left in the brewer, spilled coffee, or measurement error separately. Those effects are reflected only to the extent that they influence the values you enter. The formula also treats the TDS reading as representative of the beverage as a whole.

Units matter. Beverage mass and dry dose should use the same mass unit, such as grams, so the ratio is dimensionless. The calculator’s labels specify grams to keep entries consistent. TDS should be entered in percent units. A reading of 1.35% means 1.35 in the input field, not 0.0135.

Use cases for the Coffee Extraction Yield Calculator

Home brewers can use the estimate to document how a recipe changes when grind size, pouring pattern, steep time, or water temperature changes. A cafe team might use measurements as part of a brew log when dialing in a coffee. A roaster or educator could use the calculation to explain how beverage strength and extraction yield describe different aspects of a cup.

For example, two brews can have the same extraction yield but different TDS and beverage mass. One might be a smaller, more concentrated serving, while another is larger and more dilute. Yield describes the estimated share of the dry dose dissolved into the beverage. TDS describes concentration in that beverage. The two measurements relate through the formula, but neither alone describes every sensory quality.

When experimenting, change one recipe variable at a time where practical and repeat the brew. A single result can be affected by uneven pouring, channeling, inconsistent grinding, or an unrepresentative sample. Repeated measurements help show whether an observed difference persists. Keep tasting the coffee, since the calculation cannot identify preferred flavor or diagnose the exact cause of an unpleasant cup.

Other factors to consider when calculating extraction yield

Measurement quality affects the estimate. Scales should be suitable for the small dose and beverage quantities involved, and the TDS instrument should be clean, calibrated, and used as its manufacturer describes. Coffee samples should be prepared consistently and allowed to reach the instrument’s required conditions. Follow the instrument guidance rather than relying on an arbitrary sampling shortcut.

Brewing method can affect how representative a sample is and how much liquid remains trapped in grounds or equipment. Espresso, immersion, and paper-filter brews differ in preparation and beverage handling. The calculator uses a simple mass balance based on the finished beverage measurement. It does not adjust for method-specific retention or provide a separate model for each brewing style.

Finally, extraction yield is a technical estimate, while enjoyment is personal. A number can help you compare repeatable brews, but it does not establish a universal ideal. Bean variety, roast development, water chemistry, freshness, and individual preference all matter. Pair the result with a clear recipe and sensory notes, then use your own comparisons to guide further brewing.

Frequently asked questions

What does extraction yield mean for coffee?

It is the estimated percentage of the dry coffee dose that dissolved into the brewed beverage. This calculator derives it from beverage mass and TDS. It is a measurement description rather than a score for taste.

Is extraction yield the same as TDS?

No. TDS is the concentration of dissolved solids in the beverage, stated here as a percentage. Extraction yield estimates dissolved solids relative to the original dry dose. Beverage mass and TDS together are used to calculate yield.

How should I enter a TDS reading of 1.35%?

Enter 1.35 in the TDS field. The calculator divides the entered percentage by 100 as part of the formula. Entering 0.0135 would apply that conversion a second time and produce a result that is too low.

Can this result tell me whether my coffee tastes good?

No. The estimate does not measure aroma, sweetness, acidity, bitterness, body, or personal preference. Use it to compare measured brews, and evaluate the cup by tasting it as well.

Why might repeated calculations differ?

Differences can come from the brew itself or from weighing, sampling, and TDS measurement. Uneven extraction, inconsistent dose or beverage mass, and a sample that does not represent the whole drink can all affect the estimate. Keep the method consistent and repeat measurements when comparing recipes.

Written by

buzzonslaters.com Editorial Team

Editorial team

Independent editorial coverage of baking & coffee.